Building SDL for armeabi-v7a gives this warning:
```
SDL/src/audio/SDL_audiotypecvt.c:541:14: warning: '#pragma FENV_ACCESS' is not supported on this target - ignored [-Wignored-pragmas]
541 | #pragma STDC FENV_ACCESS ON
```
(cherry picked from commit ed4de7aeed)
It _must_ have the format set for the opposite side from the device (so
playback needs the src format set, and recording needs the dst format set),
since the stream gets mangled by the device thread if not. So if it has never
been set (stream created with NULL audiospec), just set it to match the device.
If the stream is just meant to buffer and not convert, this is desired
behavior, even if it didn't also fix a bug.
Binding the audio stream will always set the device side's format, as usual;
this does not need to be set by the caller at all.
Fixes#13363.
(cherry picked from commit f2ae6503c0)
This is what they'll end up being when used through WASAPI in shared mode,
regardless of what the hardware actually expects.
Reference Issue #12914.
(cherry picked from commit a81cf566f4)
This seems to help some devices that can't keep up with smaller fragment sizes
for whatever reason.
Fixes#13110.
(cherry picked from commit 14a4ae521a)
The keys and values of device_hash are pairs
`(SDL_AudioDeviceID devid, void *dev)` where dev can be either a
`SDL_AudioDevice *` or a `SDL_LogicalAudioDevice *`, depending on
bit 1 of devid.
We can confirm that we have got this right by looking at the
instance_id member, because logical audio devices happen to start with
the devid, whereas physical devices start with a pointer which is
unlikely to match the devid by chance.
Signed-off-by: Simon McVittie <smcv@collabora.com>
(cherry picked from commit 70b2d162e3)
Previously, we would WaitDevice first, but that would feed a silent buffer
to AAudio upfront, introducing latency. When this change was made, the
semaphore count should have been adjusted, since we're waiting on one less
buffer.
Fixes#12882.
(cherry picked from commit 2767c1a440)
This info shows up in `pw-top` ...Gnome's sound preferences (etc) would
already show something more app-specific, but this command line tool shows
specific stream names.
(cherry picked from commit a9bee3c0bf)
These callbacks run in a thread we don't control, but might call SDL_SetError,
which will claim a TLS slot that never gets otherwise deallocated. To prevent
the leak, finish each callback by explicitly freeing any thread-local data.
Fixes#12732.
(cherry picked from commit 3b91017682)
- Add checks that ObtainPhysicalAudioDevice() was previously doing
(is subsystem initialized, is device valid).
- Remove optimizations that copy string to stack to release device_hash_lock
before SDL_GetPersistentString is called. Probably not necessary, and made
the code more complex.
(cherry picked from commit b28449a58c)
This warning is actually wrong, as the variable is only used if the string pointer is valid, in which case it was initialized, but this is needed to quiet MSVC.
(cherry picked from commit fb940fff80)
SDL still manages hotplug and default device management here, but if a user
wants to use an external tool, such as `pactl move-sink-input`, to put it
onto a different device, they probably know what they're doing and we
shouldn't stop them.
If this turns out to have some unexpected consequences, though, we can revisit
the change.
Fixes https://github.com/libsdl-org/sdl2-compat/issues/367
(cherry picked from commit 4c035a1fd8)
Otherwise, in the time it takes the thread to start and other init tasks to
complete, we tend to get an underrun on some systems, which ALSA logs to
stderr.
So this is moved to an InitThread implementation, which runs from the device
thread, right before it begins its main loop.
Reference PR #12632.
(cherry picked from commit ae17b04c0d)
This prevents the waste of an initial buffer of audio on many backends, and is
hopefully harmless on all of them.
Reference PR #12632.
(cherry picked from commit 41636959d2)
When the flushing is not able to keep up with the audio stream coming in, it
will end up flushing forever and block API clients from getting any audio.
The example program in #9706 get some audio with SDL 3, while do not get any
audio with SDL 2, which I suspect is because SDL 3 is quicker at flushing the audio.
A fix for the SDL 2 issue is available in #12378.
If the pipewire thread invokes output_callback() while we're still
waiting inside PIPEWIRE_OpenDevice(), we will deadlock. The pipewire
thread owns the loop lock and is blocked on the audio device lock,
which cannot be released because pw_thread_loop_wait() needs to
reacquire the loop lock before it can return and allow
PIPEWIRE_OpenDevice() to complete and release the device lock.
This was intended to make the API public, so SDL_hashtable.h got an extreme
documentation makeover, but for now this remains a private header.
This makes several significant interface changes to SDL_HashTable, and
improves code that makes use of it in various ways.
- The ability to make "stackable" tables is removed. Apparently this still
worked with the current implementation, but I could see a future
implementation struggle mightily to support this. It'll be better for
something external to build on top of the table if it needs it, inserting a
linked list of stacked items as the hash values and managing them separately.
There was only one place in SDL using this, unnecessarily, and that has also
been cleaned up to not need it.
- You no longer specify "buckets" when creating a table, but rather an
estimated number of items the table is meant to hold. The bucket count was
crucial to our classic hashtable implementation, but meant less once we
moved to an Open Addressing implementation anyhow, since the bucket count
isn't static (and they aren't really "buckets" anymore either). Now you
can just report how many items you think the hash will hold and SDL will
allocate a reasonable default for you...or 0 to not guess, and SDL will
start small and grow as necessary, which is often the correct thing to do.
- There's no more SDL_IterateHashTableKey because there's no more "stackable"
hash tables.
- SDL_IterateHashTable() now uses a callback, which matches other parts of SDL,
and also lets us hold the read-lock for the entire iteration and get rid of
the goofy iterator state variable.
- SDL_InsertIntoHashTable() now lets you specify whether to replace existing
keys or fail if the key already exists.
- Callbacks now use SDL conventions (userdata as the first param).
- Other naming convention fixes.
I discovered we use a lot of hash tables in SDL3 internally. :) So the bulk
of this work is fixing up that code to use the new interfaces, and simplifying
things (like checking for an item to remove it if it already exists before
inserting a replacement...just do the insert atomically, it'll do all that
for you!).
The comment in the source wasn't true; PipeWire doesn't _have_ to work in
float format. It presumably does if it has to mix, but if a game is the only
thing making noise on the system--a common scenario--then it might be able to
pass, say, Sint16 data straight through to the hardware without conversion.
Fixes#12129.
You can end up with a NULL scratch buffer, which is otherwise not needed on
this path, then ConvertAudio will end up needing that scratch space to move
to float32 to apply gain.
Fixes#12091.
(I assume.)
Audio streams used to accept audio with a src or dest frequency between
4000Hz and 384000Hz. It was arbitrary (or perhaps a relic of older
resampler revisions), and testing shows unnecessary, so remove it.
Fixes#12098.
