* dos: Some initial work.
* dos: Turn off buffer on stdio SDL_IOStreams.
Seeking breaks otherwise. We might be able to just fflush() before or seeking
instead?
* dos: Audio implementation using the Sound Blaster 16.
* dos: remove audio Pump interface.
Turns out DosBox-X was having trouble with the Sound Blaster or something;
standard DosBox works correctly directly from the interrupt handler, and
without doubling the buffer size.
* dos: just dump and restore the stdio buffer when seeking.
This is MUCH faster than just leaving buffering disabled, and also works
around getting bogus reads after an fseek. SDL_LoadWAV on test/sample.wav
no longer takes several seconds to finish, and comes up with the correct
data.
I wonder if we're triggering this in LoadWAV because we're malloc'ing data
between seeks/reads, and it's causing the djgpp transfer buffer to change. Or
maybe the Fat DS trick is confusing it? I don't know, I haven't had time to
debug it, it might just be a legit libc bug in djgpp too, for all I know.
* dos: Protect audio device "thread" iterations when streams are locked.
This uses an old trick we used in SDL 1.2 for MacOS Classic, which did its
audio callback in a hardware interrupt. If the audio is locked when the
interrupt fires, make a note of it and return immediately. When the lock is
released, if the interrupt has been fired, run the audio device iteration
right then.
Since there isn't a big device lock in SDL3 (available to the app, at least),
this keeps a counter of when any SDL_AudioStream is locked, which is probably
good enough.
* dos: Implemented initial video subsystem.
This uses VESA interfaces to manage the display and works with the software
renderer.
Events aren't hooked up yet, so prepare to close DosBox on each run. :)
* dos: Whoops, forgot to add these to revision control. Core and Main support.
* dos: Wired up basic filesystem support.
This gets most of the rendering examples, which use SDL_GetBasePath() to
find textures to load, working.
* dos: Fixed compiler warning.
* dos: Initial mouse support!
* dos: Move interrupt hooking code into core/dos.
* dos: Initial keyboard support!
* dos: Use a simple ring buffer for keyboard events.
Of course Quake 1 solved this better, haha. It's smart: less memory, dirt
simple, and you don't even have to worry about synchronizing with the
interrupt handler, because it's safe for both sides no matter when an
interrupt fires.
* ci: add djgpp job
[sdl-ci-filter djgpp]
[sdl-ci-artifacts]
* dos: Fix build issues after rebase onto current main
- SDL_runapp.c: Add SDL_PLATFORM_DOS to the exclusion list so the
generic
SDL_RunApp() is disabled when the DOS-specific one is compiled.
- SDL.c: Exclude SDL_Gtk_Quit() on DOS. DJGPP defines __unix__ which
sets
SDL_PLATFORM_UNIX, but DOS has no GTK/display server. The GTK source
is not compiled (CMake UNIX is false for DOS) so this was a link
error.
- sdlplatform.cmake: Add DOS case to SDL_DetectCMakePlatform so the
platform is properly detected from CMAKE_SYSTEM_NAME=DOS.
- i586-pc-msdosdjgpp.cmake: Add i386-pc-msdosdjgpp-gcc as a fallback
compiler name, since some DJGPP toolchain builds use the i386 prefix.
* Add 8-bit palette support to DOS VESA driver
* Add VBE page-flipping, state restore, and robust keyboard handling
- Implement double-buffered page-flipping for VBE modes with >1 image
page
- Save and restore full VBE state on video init/quit for clean mode
switching
- Improve DOS keyboard handling: support extended scancodes and Pause
key
- Lock ISR code/data to prevent page faults during interrupts
- Always vsync when blitting in single-buffered modes to reduce tearing
* Refactor Sound Blaster audio mixing to main loop
Move audio mixing out of IRQ handler to main loop for improved
stability and to avoid reentrancy issues. Add SDL_DOS_PumpAudio
function, update DMA buffer handling, and adjust sample rate to 22050
Hz.
Silence stale DMA buffer halves to prevent stutter during load.
* Add DOS timer support and update build config
* Add support for pre-SB16 8-bit mono Sound Blaster audio
Detect SB version and select 8-bit mono or 16-bit stereo mode.
Handle DMA and DSP setup for both SB16 and pre-SB16 hardware.
Add FORCE_SB_8BIT option for testing in DOSBox.
* Add SB Pro stereo support and simplify IRQ handler
* Add DOS joystick driver support
* Improve DOS hardware handling and clarify memory allocation
- Poll Sound Blaster DSP status instead of fixed delay after speaker-on
- Clarify DPMI conventional memory is always locked; update comments
- Document and justify DMA memory allocation strategy
- Free IRET wrapper after restoring interrupt vector to avoid leaks
- Throttle joystick axis polling to ~60 Hz to reduce BIOS timing loop
cost
- Always poll joystick buttons directly for responsiveness
* Query and use mouse sensitivity from INT 33h function 0x1B
* Add support for VESA banked framebuffer modes
Implement banked framebuffer access for VBE 1.2+ modes without LFB.
Detect and initialize banked modes, copy framebuffer data using bank
switching, and blank the framebuffer on mode set. Page-flipping is
disabled in banked mode.
* Add optional vsync to page flipping in DOS VESA driver
* Add cooperative threading support for DOS platform
* Move SoundBlaster audio mixing to SDL audio thread
* Fix DOS platform comments and workarounds for DJGPP support
* Fix SoundBlaster IRQ handling and DMA setup for DOS
- Pass IRQ number to DOS_EndOfInterrupt and handle slave PIC EOI
- Validate DMA channel from BLASTER variable
- Correct DMA page register selection for SB16
- Improve BLASTER variable parsing and error messages
- Unmask/mask IRQs on correct PIC in DOS_HookInterrupt
- Rename SDL_dosjoystick.c to SDL_sysjoystick.c
- Include SDL_main_callbacks.h in SDL_sysmain_runapp.c
- Add include guard to SDL_systhread_c.h
* Add DOS platform options and preseed cache for DJGPP
Disable unsupported SDL features when building for DOS. Add
PreseedDOSCache.cmake to pre-populate CMake cache variables for DJGPP.
* cmake: use a 8.3 naming scheme for tests on DOS
* Apply code style
* Update include/SDL3/SDL_platform_defines.h
Co-authored-by: Anonymous Maarten <madebr@users.noreply.github.com>
* Code review clean up
- Split DOS VESA mode-setting into its own file
- Replace magic numbers with named constants
- Update copyright dates to 2026
- Substract time taken by other threads form delays
* Fix DOS bugs and improve compatibility
- Disable fseeko64 for DJGPP due to broken implementation
- Refactor DOS timer delay to always yield and avoid busy-waiting
- Fix animated cursor rendering in DOS VESA backend
- Always set display mode when creating DOS VESA window
- Work around DJGPP allowing invalid file access in testfile.c
- Bump max threads to 16
- Apply workarounds for threading tests
* Add DOS platform documentation and fix a few issues
- Fix fullscreen default resolution
- Improve best mode matching
- Fix builds on GCC older than 7.0
- Fix text input events
* Fix keyboard mapping of "*"
* Fix running, and existing, under PCem
* Apply suggestions from code review
Co-authored-by: Cameron Cawley <ccawley2011@gmail.com>
* Pre-mix audio in ring buffer and copy to DMA via IRQ thread
* Video fixes and optimizations
* DOS: Fix Intel 740 and VGA compatability
* DOS: Update readme
* DOS: Fix thread ID, get GPU name
* DOS: Cap mouse range
* DOS: Map test resources to 8.3 names
* DOS: Skip unsupported WM color modes
* Fix "windowed" resolution selection
* DOS: Hide INDEX8 modes behind SDL_DOS_ALLOW_INDEX8_MODES
* Remove SDL_HINT_DOS_ALLOW_INDEX8_MODES and order modes logically
* Don't convert cursor if dest is not INDEX8
---------
Co-authored-by: Ryan C. Gordon <icculus@icculus.org>
Co-authored-by: Anonymous Maarten <anonymous.maarten@gmail.com>
Co-authored-by: Cameron Cawley <ccawley2011@gmail.com>
Co-authored-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Co-authored-by: Jay Petacat <jay@jayschwa.net>
Tested-by: Cameron Cawley <ccawley2011@gmail.com>
Now we render directly to the window, scaling as appropriate. This fixes some
concerns the render target introduced, like the quality of the final scaled
output, how to step outside of the logical size temporarily to draw some
things sharply at the native resolution, and loss of sub-pixel precision.
Fixes#8736.
We require stdbool.h in the build environment, so we might as well use the plain bool type.
If your environment doesn't have stdbool.h, this simple replacement will suffice:
typedef signed char bool;
Most SDL functions used to indicate success or failure using an int return code. These functions have been changed to return SDL_bool.
Here is a coccinelle patch to change code that previously compared the return value to 0 and changes it to a boolean test:
@ bool_return_type @
identifier func =~ "^(SDL_AddEventWatch|SDL_AddHintCallback|SDL_AddSurfaceAlternateImage|SDL_AddVulkanRenderSemaphores|SDL_BindAudioStream|SDL_BindAudioStreams|SDL_BlitSurface|SDL_BlitSurface9Grid|SDL_BlitSurfaceScaled|SDL_BlitSurfaceTiled|SDL_BlitSurfaceTiledWithScale|SDL_BlitSurfaceUnchecked|SDL_BlitSurfaceUncheckedScaled|SDL_CaptureMouse|SDL_ClearAudioStream|SDL_ClearClipboardData|SDL_ClearComposition|SDL_ClearError|SDL_ClearProperty|SDL_ClearSurface|SDL_CloseIO|SDL_CloseStorage|SDL_ConvertAudioSamples|SDL_ConvertEventToRenderCoordinates|SDL_ConvertPixels|SDL_ConvertPixelsAndColorspace|SDL_CopyFile|SDL_CopyProperties|SDL_CopyStorageFile|SDL_CreateDirectory|SDL_CreateStorageDirectory|SDL_CreateWindowAndRenderer|SDL_DateTimeToTime|SDL_DestroyWindowSurface|SDL_DetachVirtualJoystick|SDL_DisableScreenSaver|SDL_EnableScreenSaver|SDL_EnumerateDirectory|SDL_EnumerateProperties|SDL_EnumerateStorageDirectory|SDL_FillSurfaceRect|SDL_FillSurfaceRects|SDL_FlashWindow|SDL_FlipSurface|SDL_FlushAudioStream|SDL_FlushRenderer|SDL_GL_DestroyContext|SDL_GL_GetAttribute|SDL_GL_GetSwapInterval|SDL_GL_LoadLibrary|SDL_GL_MakeCurrent|SDL_GL_SetAttribute|SDL_GL_SetSwapInterval|SDL_GL_SwapWindow|SDL_GetAudioDeviceFormat|SDL_GetAudioStreamFormat|SDL_GetCameraFormat|SDL_GetClosestFullscreenDisplayMode|SDL_GetCurrentRenderOutputSize|SDL_GetCurrentTime|SDL_GetDXGIOutputInfo|SDL_GetDateTimeLocalePreferences|SDL_GetDisplayBounds|SDL_GetDisplayUsableBounds|SDL_GetGDKDefaultUser|SDL_GetGDKTaskQueue|SDL_GetGamepadSensorData|SDL_GetGamepadTouchpadFinger|SDL_GetHapticEffectStatus|SDL_GetJoystickBall|SDL_GetMasksForPixelFormat|SDL_GetPathInfo|SDL_GetRectUnion|SDL_GetRectUnionFloat|SDL_GetRenderClipRect|SDL_GetRenderColorScale|SDL_GetRenderDrawBlendMode|SDL_GetRenderDrawColor|SDL_GetRenderDrawColorFloat|SDL_GetRenderLogicalPresentation|SDL_GetRenderLogicalPresentationRect|SDL_GetRenderOutputSize|SDL_GetRenderSafeArea|SDL_GetRenderScale|SDL_GetRenderVSync|SDL_GetRenderViewport|SDL_GetSensorData|SDL_GetStorageFileSize|SDL_GetStoragePathInfo|SDL_GetSurfaceAlphaMod|SDL_GetSurfaceBlendMode|SDL_GetSurfaceClipRect|SDL_GetSurfaceColorKey|SDL_GetSurfaceColorMod|SDL_GetTextInputArea|SDL_GetTextureAlphaMod|SDL_GetTextureAlphaModFloat|SDL_GetTextureBlendMode|SDL_GetTextureColorMod|SDL_GetTextureColorModFloat|SDL_GetTextureScaleMode|SDL_GetTextureSize|SDL_GetWindowAspectRatio|SDL_GetWindowBordersSize|SDL_GetWindowMaximumSize|SDL_GetWindowMinimumSize|SDL_GetWindowPosition|SDL_GetWindowRelativeMouseMode|SDL_GetWindowSafeArea|SDL_GetWindowSize|SDL_GetWindowSizeInPixels|SDL_GetWindowSurfaceVSync|SDL_HideCursor|SDL_HideWindow|SDL_Init|SDL_InitHapticRumble|SDL_InitSubSystem|SDL_LoadWAV|SDL_LoadWAV_IO|SDL_LockAudioStream|SDL_LockProperties|SDL_LockSurface|SDL_LockTexture|SDL_LockTextureToSurface|SDL_MaximizeWindow|SDL_MinimizeWindow|SDL_MixAudio|SDL_OpenURL|SDL_OutOfMemory|SDL_PauseAudioDevice|SDL_PauseAudioStreamDevice|SDL_PauseHaptic|SDL_PlayHapticRumble|SDL_PremultiplyAlpha|SDL_PremultiplySurfaceAlpha|SDL_PushEvent|SDL_PutAudioStreamData|SDL_RaiseWindow|SDL_ReadStorageFile|SDL_ReadSurfacePixel|SDL_ReadSurfacePixelFloat|SDL_RegisterApp|SDL_ReloadGamepadMappings|SDL_RemovePath|SDL_RemoveStoragePath|SDL_RemoveTimer|SDL_RenamePath|SDL_RenameStoragePath|SDL_RenderClear|SDL_RenderCoordinatesFromWindow|SDL_RenderCoordinatesToWindow|SDL_RenderFillRect|SDL_RenderFillRects|SDL_RenderGeometry|SDL_RenderGeometryRaw|SDL_RenderLine|SDL_RenderLines|SDL_RenderPoint|SDL_RenderPoints|SDL_RenderPresent|SDL_RenderRect|SDL_RenderRects|SDL_RenderTexture|SDL_RenderTexture9Grid|SDL_RenderTextureRotated|SDL_RenderTextureTiled|SDL_RequestAndroidPermission|SDL_RestoreWindow|SDL_ResumeAudioDevice|SDL_ResumeAudioStreamDevice|SDL_ResumeHaptic|SDL_RumbleGamepad|SDL_RumbleGamepadTriggers|SDL_RumbleJoystick|SDL_RumbleJoystickTriggers|SDL_RunHapticEffect|SDL_SaveBMP|SDL_SaveBMP_IO|SDL_SendAndroidMessage|SDL_SendGamepadEffect|SDL_SendJoystickEffect|SDL_SendJoystickVirtualSensorData|SDL_SetAppMetadata|SDL_SetAppMetadataProperty|SDL_SetAudioDeviceGain|SDL_SetAudioPostmixCallback|SDL_SetAudioStreamFormat|SDL_SetAudioStreamFrequencyRatio|SDL_SetAudioStreamGain|SDL_SetAudioStreamGetCallback|SDL_SetAudioStreamInputChannelMap|SDL_SetAudioStreamOutputChannelMap|SDL_SetAudioStreamPutCallback|SDL_SetBooleanProperty|SDL_SetClipboardData|SDL_SetClipboardText|SDL_SetCursor|SDL_SetFloatProperty|SDL_SetGamepadLED|SDL_SetGamepadMapping|SDL_SetGamepadPlayerIndex|SDL_SetGamepadSensorEnabled|SDL_SetHapticAutocenter|SDL_SetHapticGain|SDL_SetJoystickLED|SDL_SetJoystickPlayerIndex|SDL_SetJoystickVirtualAxis|SDL_SetJoystickVirtualBall|SDL_SetJoystickVirtualButton|SDL_SetJoystickVirtualHat|SDL_SetJoystickVirtualTouchpad|SDL_SetLinuxThreadPriority|SDL_SetLinuxThreadPriorityAndPolicy|SDL_SetLogPriorityPrefix|SDL_SetMemoryFunctions|SDL_SetNumberProperty|SDL_SetPaletteColors|SDL_SetPointerProperty|SDL_SetPointerPropertyWithCleanup|SDL_SetPrimarySelectionText|SDL_SetRenderClipRect|SDL_SetRenderColorScale|SDL_SetRenderDrawBlendMode|SDL_SetRenderDrawColor|SDL_SetRenderDrawColorFloat|SDL_SetRenderLogicalPresentation|SDL_SetRenderScale|SDL_SetRenderTarget|SDL_SetRenderVSync|SDL_SetRenderViewport|SDL_SetScancodeName|SDL_SetStringProperty|SDL_SetSurfaceAlphaMod|SDL_SetSurfaceBlendMode|SDL_SetSurfaceColorKey|SDL_SetSurfaceColorMod|SDL_SetSurfaceColorspace|SDL_SetSurfacePalette|SDL_SetSurfaceRLE|SDL_SetTLS|SDL_SetTextInputArea|SDL_SetTextureAlphaMod|SDL_SetTextureAlphaModFloat|SDL_SetTextureBlendMode|SDL_SetTextureColorMod|SDL_SetTextureColorModFloat|SDL_SetTextureScaleMode|SDL_SetThreadPriority|SDL_SetWindowAlwaysOnTop|SDL_SetWindowAspectRatio|SDL_SetWindowBordered|SDL_SetWindowFocusable|SDL_SetWindowFullscreen|SDL_SetWindowFullscreenMode|SDL_SetWindowHitTest|SDL_SetWindowIcon|SDL_SetWindowKeyboardGrab|SDL_SetWindowMaximumSize|SDL_SetWindowMinimumSize|SDL_SetWindowModalFor|SDL_SetWindowMouseGrab|SDL_SetWindowMouseRect|SDL_SetWindowOpacity|SDL_SetWindowPosition|SDL_SetWindowRelativeMouseMode|SDL_SetWindowResizable|SDL_SetWindowShape|SDL_SetWindowSize|SDL_SetWindowSurfaceVSync|SDL_SetWindowTitle|SDL_SetiOSAnimationCallback|SDL_ShowAndroidToast|SDL_ShowCursor|SDL_ShowMessageBox|SDL_ShowSimpleMessageBox|SDL_ShowWindow|SDL_ShowWindowSystemMenu|SDL_StartTextInput|SDL_StartTextInputWithProperties|SDL_StopHapticEffect|SDL_StopHapticEffects|SDL_StopHapticRumble|SDL_StopTextInput|SDL_SyncWindow|SDL_TimeToDateTime|SDL_TryLockMutex|SDL_TryLockRWLockForReading|SDL_TryLockRWLockForWriting|SDL_TryWaitSemaphore|SDL_UnlockAudioStream|SDL_UpdateHapticEffect|SDL_UpdateNVTexture|SDL_UpdateTexture|SDL_UpdateWindowSurface|SDL_UpdateWindowSurfaceRects|SDL_UpdateYUVTexture|SDL_Vulkan_CreateSurface|SDL_Vulkan_LoadLibrary|SDL_WaitConditionTimeout|SDL_WaitSemaphoreTimeout|SDL_WarpMouseGlobal|SDL_WriteStorageFile|SDL_WriteSurfacePixel|SDL_WriteSurfacePixelFloat)$";
@@
(
func(
...
)
- == 0
|
- func(
+ !func(
...
)
- < 0
|
- func(
+ !func(
...
)
- != 0
|
- func(
+ !func(
...
)
- == -1
)
This adds functions to query the keymap:
* SDL_GetCurrentKeymap()
* SDL_GetKeymapKeycode()
* SDL_GetKeymapScancode()
* SDL_ReleaseKeymap()
and these are distinct from the function to query the event keycode associated with a scancode, which might be affected by SDL_HINT_KEYCODE_OPTIONS.
Also added an SDL_bool parameter to SDL_GetKeyName() and SDL_GetKeyFromName() to enable upper case handling of the name.
It was intended to make the API easier to use, but various automatic garbage collection all had flaws, and making the application periodically clean up temporary memory added cognitive load to using the API, and in many cases was it was difficult to restructure threaded code to handle this.
So, we're largely going back to the original system, where the API returns allocated results and you free them.
In addition, to solve the problems we originally wanted temporary memory for:
* Short strings with a finite count, like device names, get stored in a per-thread string pool.
* Events continue to use temporary memory internally, which is cleaned up on the next event processing cycle.
The new function includes the cursor position so IME UI elements can be placed relative to the cursor, as well as having the whole text area available so on-screen keyboards can avoid it.
SDL_StartTextInput(), SDL_StopTextInput(), SDL_TextInputActive(), SDL_ClearComposition(), and SDL_SetTextInputRect() all now take a window parameter.
This change also fixes IME candidate positioning when SDL_SetTextInputRect() is called before SDL_StartTextInput(), as is recommended in the documentation.
- SDL_RWops is now an opaque struct.
- SDL_AllocRW is gone. If an app is creating a custom RWops, they pass the
function pointers to SDL_CreateRW(), which are stored internally.
- SDL_RWclose is gone, there is only SDL_DestroyRW(), which calls the
implementation's `->close` method before freeing other things.
- There is only one path to create and use RWops now, so we don't have to
worry about whether `->close` will call SDL_DestroyRW, or if this will
risk any Properties not being released, etc.
- SDL_RWFrom* still works as expected, for getting a RWops without having
to supply your own implementation. Objects from these functions are also
destroyed with SDL_DestroyRW.
- Lots of other cleanup and SDL3ization of the library code.
