Backports some test helper macros added after 2.16. This will facilitate
backporting new test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a pointer mismatch when int32_t is not int, for example on Cortex-M where
in32_t is long int. Fix#4530
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When Mbed TLS 2.16 was released, the requirement was Python 2, not
Python 3. Since then, upstream Python 2 support has stopped, but it is
still maintained in some long-term-support distributions. For the sake
of users who build the unit tests in such environments, test that
generate_test_code.py remains compatible with Python 2.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Python 2 is no longer officially supported, but we were still using it
to generate test suite .c files from .function files when using GNU
make. Switch to looking for Python 3.
CMake currently uses a system-dependent version of the Python language.
This commit does not affect CMake builds.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
An SSL client can be configured to insist on a minimum size for the
Diffie-Hellman (DHM) parameters sent by the server. Add several test
cases where the server sends parameters with exactly the minimum
size (must be accepted) or parameters that are one bit too short (must
be rejected). Make sure that there are test cases both where the
boundary is byte-aligned and where it isn't.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Our interoperability tests fail with a recent OpenSSL server. The
reason is that they force 1024-bit Diffie-Hellman parameters, which
recent OpenSSL (e.g. 1.1.1f on Ubuntu 20.04) reject:
```
140072814650688:error:1408518A:SSL routines:ssl3_ctx_ctrl:dh key too small:../ssl/s3_lib.c:3782:
```
We've been passing custom DH parameters since
6195767554 because OpenSSL <=1.0.2a
requires it. This is only concerns the version we use as
OPENSSL_LEGACY. So only use custom DH parameters for that version. In
compat.sh, use it based on the observed version of $OPENSSL_CMD.
This way, ssl-opt.sh and compat.sh work (barring other issues) for all
our reference versions of OpenSSL as well as for a modern system OpenSSL.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In a case exprssion, `|` separates patterns so it needs to be quoted.
Also `\` was not actually part of the set since it was quoting another
character.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
If `$FILTER` (`-f`) and `$EXCLUDE` (`-e`) are simple selections that
can be expressed as shell patterns, use a case statement instead of
calling grep to determine whether a test case should be executed.
Using a case statement significantly reduces the time it takes to
determine that a test case is excluded (but the improvement is small
compared to running the test).
This noticeably speeds up running a single test or a small number of
tests. Before:
```
tests/ssl-opt.sh -f Default 1.75s user 0.54s system 79% cpu 2.885 total
```
After:
```
tests/ssl-opt.sh -f Default 0.37s user 0.14s system 29% cpu 1.715 total
```
There is no perceptible difference when running a large number of tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Avoid using the external command grep for simple string-based checks.
Prefer a case statement. This improves performance.
The performance improvement is moderate but noticeable when skipping
most tests. When a test is run, the cost of the associated grep calls
is negligible. In this commit, I focused on the uses of grep that can
be easily replaced and that are executed a large number of times.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Marked dirty memory ends up in the result buffer after encoding (due to
the input having been marked dirty), and then the final comparison
to make sure that we got what we expected was triggering the constant
flow checker.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
These tests validate that an entropy object can be reused and that
calling mbedtls_entropy_free() twice is ok.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
These tests are trivial except when compiling with MBEDTLS_THREADING_C
and a mutex implementation that are picky about matching each
mbedtls_mutex_init() with exactly one mbedtls_mutex_free().
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Document the usage inside the library, and relate it with how it's
additionally used in the test code.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Subtract the number of calls to mbedtls_mutex_free() from the number
of calls to mbedtls_mutex_init(). A mutex leak will manifest as a
positive result at the end of the test case.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
If the mutex usage verification framework is enabled and it detects a
mutex usage error, report this error and mark the test as failed.
This detects most usage errors, but not all cases of using
uninitialized memory (which is impossible in full generality) and not
leaks due to missing free (which will be handled in a subsequent commit).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
Check that the source address and the frame counter have the expected
length. Otherwise, if the test data was invalid, the test code could
build nonsensical inputs, potentially overflowing the iv buffer.
The primary benefit of this change is that it also silences a warning
from compiling with `gcc-10 -O3` (observed with GCC 10.2.0 on
Linux/amd64). GCC unrolled the loops and complained about a buffer
overflow with warnings like:
```
suites/test_suite_ccm.function: In function 'test_mbedtls_ccm_star_auth_decrypt':
suites/test_suite_ccm.function:271:15: error: writing 1 byte into a region of size 0 [-Werror=stringop-overflow=]
271 | iv[i] = source_address->x[i];
| ~~~~~~^~~~~~~~~~~~~~~~~~~~~~
suites/test_suite_ccm.function:254:19: note: at offset [13, 14] to object 'iv' with size 13 declared here
254 | unsigned char iv[13];
```
Just using memcpy instead of loops bypasses this warnings. The added
checks are a bonus.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
When using pthread mutexes (MBEDTLS_THREADING_C and
MBEDTLS_THREADING_PTHREAD enabled), and when test hooks are
enabled (MBEDTLS_TEST_HOOKS), set up wrappers around the
mbedtls_mutex_xxx abstraction. In this commit, the wrapper functions
don't do anything yet.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Chris Jones <christopher.jones@arm.com>
We care about the exit code of our server, for example if it's
reporting a memory leak after having otherwise executed correctly.
We don't care about the exit code of the servers we're using for
interoperability testing (openssl s_server, gnutls-serv). We assume
that they're working correctly anyway, and they return 1 (gnutls-serv)
or die by the signal handle the signal (openssl) when killed by a
signal.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This used to be the case a long time ago but was accidentally broken.
Fix <github:nogrep> #4103 for ssl-opt.sh.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Add test cases for mbedtls_mpi_sub_abs() where the second operand has
more limbs than the first operand (which, if the extra limbs are not
all zero, implies that the function returns
MBEDTLS_ERR_MPI_NEGATIVE_VALUE).
This exposes a buffer overflow (reported in #4042).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In component_test_no_hmac_drbg, the fact that HMAC_DRBG is disabled
doesn't affect the SSL code, but the fact that deterministic ECDSA is
disabled does. So run some ECDSA-related SSL tests.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
In order to remove large buffers from the stack, the der data is written
into the same buffer that the pem is eventually written into, however
although the pem data is zero terminated, there is now data left in the
buffer after the zero termination, which can cause
mbedtls_x509_crt_parse to fail to parse the same buffer if passed back
in. Patches also applied to mbedtls_pk_write_pubkey_pem, and
mbedtls_pk_write_key_pem, which use similar methods of writing der data
to the same buffer, and tests modified to hopefully catch any future
regression on this.
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
mbedtls_ctr_drbg_set_reseed_interval() and
mbedtls_hmac_drbg_set_reseed_interval() can now be called before
their seed functions and the reseed_interval value will persist.
Previously it would be overwritten with the default value.
*_drbg_reseed_interval is now set in init() and free().
mbedtls_ctr_drbg_free() and mbedtls_hmac_drbg_free() now
reset the drbg context to the state immediately after init().
Tests:
- Added test to check that DRBG reseeds when reseed_counter
reaches reseed_interval, if reseed_interval set before seed
and reseed_interval is less than MBEDTLS_*_DRBG_RESEED_INTERVAL.
Signed-off-by: gacquroff <gavina352@gmail.com>
Fixes an issue where configs that had `MBEDTLS_MPI_MAX_BITS` greater than 256
but smaller than the test that was running (792 bits) the test would fail
incorrectly.
Signed-off-by: Chris Jones <christopher.jones@arm.com>
