Expected output generated by OpenSSL (see below) apart from the case
where both password and salt are either NULL or zero length, as OpenSSL
does not support this. For these test cases we have had to use our own
output as that which is expected. Code to generate test cases is as
follows:
#include <openssl/pkcs12.h>
#include <openssl/evp.h>
#include <string.h>
int Keygen_Uni( const char * test_name, unsigned char *pass, int
passlen, unsigned char *salt,
int saltlen, int id, int iter, int n,
unsigned char *out, const EVP_MD
*md_type )
{
size_t index;
printf( "%s\n", test_name );
int ret = PKCS12_key_gen_uni( pass, passlen, salt, saltlen, id, iter,
n, out, md_type );
if( ret != 1 )
{
printf( "Key generation returned %d\n", ret );
}
else
{
for( index = 0; index < n; ++index )
{
printf( "%02x", out[index] );
}
printf( "\n" );
}
printf( "\n" );
}
int main(void)
{
unsigned char out_buf[48];
unsigned char pass[64];
int pass_len;
unsigned char salt[64];
int salt_len;
/* If ID=1, then the pseudorandom bits being produced are to be used
as key material for performing encryption or decryption.
If ID=2, then the pseudorandom bits being produced are to be
used as an IV (Initial Value) for encryption or decryption.
If ID=3, then the pseudorandom bits being produced are
to be used as an integrity key for MACing.
*/
int id = 1;
int iter = 3;
memset( out_buf, 0, sizeof( out_buf ) );
memset( pass, 0, sizeof( pass ) );
memset( salt, 0, sizeof( salt ) );
Keygen_Uni( "Zero length pass and salt", pass, 0, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass and salt", NULL, 0, NULL, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Zero length pass", pass, 0, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL pass", NULL, 0, salt, 8, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
memset( salt, 0, sizeof( salt ) );
pass[0] = 0x01;
pass[1] = 0x23;
pass[2] = 0x45;
pass[3] = 0x67;
pass[4] = 0x89;
pass[5] = 0xab;
pass[6] = 0xcd;
pass[7] = 0xef;
Keygen_Uni( "Zero length salt", pass, 8, salt, 0, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
Keygen_Uni( "NULL salt", pass, 8, NULL, 0, id, iter, sizeof(out_buf),
out_buf, EVP_md5( ) );
memset( out_buf, 0, sizeof( out_buf ) );
salt[0] = 0x01;
salt[1] = 0x23;
salt[2] = 0x45;
salt[3] = 0x67;
salt[4] = 0x89;
salt[5] = 0xab;
salt[6] = 0xcd;
salt[7] = 0xef;
Keygen_Uni( "Valid pass and salt", pass, 8, salt, 8, id, iter,
sizeof(out_buf),
out_buf, EVP_md5( ) );
return 0;
}
Signed-off-by: Paul Elliott <paul.elliott@arm.com>
Can't call mbedtls_cipher_free(&invalid_ctx) in cleanup if
mbedtls_cipher_init(&invalid_ctx) hasn't been called.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
A DES or AES block operation can fail in alternative implementations of
mbedtls_internal_aes_encrypt() (under MBEDTLS_AES_ENCRYPT_ALT),
mbedtls_internal_aes_decrypt() (under MBEDTLS_AES_DECRYPT_ALT),
mbedtls_des_crypt_ecb() (under MBEDTLS_DES_CRYPT_ECB_ALT),
mbedtls_des3_crypt_ecb() (under MBEDTLS_DES3_CRYPT_ECB_ALT).
A failure can happen if the accelerator peripheral is in a bad state.
Several block modes were not catching the error.
This commit does the following code changes:
* Fix DES and AES API calls which ignored the return values:
* In library code: on failure, goto exit and return ret.
* In pkey programs: goto exit.
* In the benchmark program: exit (not ideal since there's no error
message, but it's what the code currently does for failures).
* In test code: TEST_ASSERT.
* Changelog entry.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Signed-off-by: Mateusz Starzyk <mateusz.starzyk@mobica.com>
Negative x coordinate was tested with the value -1. It happens to be one
of the low order points both for Curve25519 and Curve448 and might be
rejected because of that and not because it is negative. Make sure that
x < 0 is the only plausible reason for the point to be rejected.
Signed-off-by: Janos Follath <janos.follath@arm.com>
A test case for which the loop would take practically forever if it was
reached. The point would be to validate that the loop is not reached.
The test case should cause the CI to time out if starting with the
current code, ecp_check_pubkey_mx() was changed to call
ecp_check_pubkey_x25519() first and run the mbedtls_mpi_size(() test
afterwards, which would make no semantic difference in terms of memory
contents when the function returns, but would open the way for a DoS.
Signed-off-by: Janos Follath <janos.follath@arm.com>
Fix a bug introduced in "Fix multiplication producing a negative zero" that
caused the sign to be forced to +1 when A > 0, B < 0 and B's low-order limb
is 0.
Add a non-regression test. More generally, systematically test combinations
of leading zeros, trailing zeros and signs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
No need to bypass the API to fill limbs. It's a better test to just
set the top bit that we want to have set, and it's one less bypass of
the API.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix mbedtls_mpi_mul_mpi() when one of the operands is zero and the
other is negative. The sign of the result must be 1, since some
library functions do not treat {-1, 0, NULL} or {-1, n, {0}} as
representing the value 0.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Fix a null pointer dereference in mbedtls_mpi_exp_mod(X, A, N, E, _RR) when
A is the value 0 represented with 0 limbs.
Make the code a little more robust against similar bugs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test both 0 represented with 0 limbs ("0 (null)") and 0 represented
with 1 limb ("0 (1 limb)"), because occasionally there are bugs with
0-limb bignums and occasionally there are bugs with removing leading
zero limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
mbedtls_mpi_exp_mod can be called in three ways regarding the speed-up
parameter _RR: null (unused), zero (will be updated), nonzero (will be
used). Systematically test all three.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Remove the RR parameter to the mbedtls_mpi_exp_mod test function.
It was never used in the test data, so there is no loss of functionality.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Test mbedtls_mpi_safe_cond_assign() and mbedtls_mpi_safe_cond_swap()
with their "unsafe" counterparts mbedtls_mpi_copy() and
mbedtls_mpi_swap(). This way we don't need to repeat the coverage of
test cases.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Similarly to "Overhaul testing of mbedtls_mpi_copy", simplify the code
to test mbedtls_mpi_swap to have just one function for distinct MPIs
and one function for swapping an MPI with itself, covering all cases
of size (0, 1, >1) and sign (>0, <0).
The test cases are exactly the same as for mbedtls_mpi_copy with the
following replacements:
* `Copy` -> `Swap`
* ` to ` -> ` with `
* `_copy` -> `_swap`
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace the two test functions mbedtls_mpi_copy_sint (supporting signed
inputs but always with exactly one limb) and mbedtls_mpi_copy_binary
(supporting arbitrary-sized inputs but not negative inputs) by a single
function that supports both arbitrary-sized inputs and arbitrary-signed
inputs. This will allows testing combinations like negative source and
zero-sized destination.
Also generalize mpi_copy_self to support arbitrary inputs.
Generate a new list of test cases systematically enumerating all
possibilities among various categories: zero with 0 or 1 limb, negative or
positive with 1 limb, negative or positive with >1 limb. I used the
following Perl script:
```
sub rhs { $_ = $_[0]; s/bead/beef/; s/ca5cadedb01dfaceacc01ade/face1e55ca11ab1ecab005e5/; $_ }
%v = (
"zero (null)" => "",
"zero (1 limb)" => "0",
"small positive" => "bead",
"large positive" => "ca5cadedb01dfaceacc01ade",
"small negative" => "-bead",
"large negative" => "-ca5cadedb01dfaceacc01ade",
);
foreach $s (sort keys %v) {
foreach $d (sort keys %v) {
printf "Copy %s to %s\nmbedtls_mpi_copy:\"%s\":\"%s\"\n\n",
$s, $d, $v{$s}, rhs($v{$d});
}
}
foreach $s (sort keys %v) {
printf "Copy self: %s\nmpi_copy_self:\"%s\"\n\n", $s, $v{$s};
}
```
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This is mostly to look for cases where the sign bit may have been left at 0
after zerozing memory, or a value of 0 with the sign bit set to -11. Both of
these mostly work fine, so they can go otherwise undetected by unit tests,
but they can break when certain combinations of functions are used.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
Replace calls to mbedtls_mpi_read_string() with a wrapper
mbedtls_test_read_mpi() when reading test data except for the purpose
of testing mbedtls_mpi_read_string() itself. The wrapper lets the test
data control precisely how many limbs the constructed MPI has.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
This test helper reads an MPI from a string and guarantees control over the
number of limbs of the MPI, allowing test cases to construct values with or
without leading zeros, including 0 with 0 limbs.
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
* mbedtls-2.16: (21 commits)
Reword changelog - Test Resource Leak
Update changelog formatting - Missing Free Context
Fix fd range for select on Windows
Refactor file descriptor checks into a common function
Update changelog formatting - Missing Free Context
Update changelog formatting - Missing Free Context
Changelog entry for Free Context in test_suite_aes fix
Free context at the end of aes_crypt_xts_size()
Add changelog entry for non-uniform MPI random generation
ecp: Fix bias in the generation of blinding values
DHM: add test case with x_size < 0
DHM tests: add some explanations
DHM: add notes about leading zeros
dhm: Fix bias in private key generation and blinding
dhm_check_range: microoptimization
DHM refactoring: use dhm_random_below in dhm_make_common
DHM blinding: don't accept P-1 as a blinding value
DHM refactoring: unify mbedtls_dhm_make_{params,public}
Test mbedtls_dhm_make_params with different x_size
Repeat a few DH tests
...
There was already a test case for 0 but with a non-empty representation
(X->n == 1). Add a test case with X->n == 0 (freshly initialized mpi).
Signed-off-by: Gilles Peskine <Gilles.Peskine@arm.com>
in file tests/suite/test_suite_aes.function, aes_crypt_xts_size()
did not free the context upon the function exit.
The function now frees the context on exit.
Already resolved for 2.x and development - this is a backport for
2.16
Fixes#4176
Signed-off-by: JoeSubbiani <Joe.Subbiani@arm.com>
