As written earlier, the config-ml.in change from the
--with-multi-buildlist patch broke build of Ada, Ada uses
RTSDIR = rts$(subst /,_,$(MULTISUBDIR))
and expects that the primary multilib will result in rts
rather than rts_. it results in after the --with-multi-buildlist
changes.
The following patch fixes it by restoring previous behavior for
ml_subdir / MULTISUBDIR such that for primary multilib it is
still empty rather than /.
2026-01-10 Jakub Jelinek <jakub@redhat.com>
PR ada/123490
* config-ml.in: Restore ml_subdir being empty instead of /.
for the primary multilib.
This patch introduces a new configure-time option --with-multi-buildlist
to allow fine-grained control over which multilib variants are built.
The option accepts a path to a file containing a list of multilib
directories to be included in the build. Each line in the file should
contain a single multilib directory name, matching those generated by
the compiler's --print-multi-lib output.
This mechanism is target-independent and enables users to reduce build
time and binary size by excluding unnecessary multilib variants. It is
especially useful for embedded targets with constrained environments or
vendor-specific requirements.
The option is propagated to both host and target configuration stages,
and used in config-ml.in and gcc/Makefile.in to filter the multilib
list.
Documentation for this feature is added to gcc/doc/install.texi.
/ChangeLog
* config-ml.in: Use with_multi_buildlist to build multidirs.
Skip configuration for subdir returned by
--print-multi-directory.
* configure: Regenerate.
* configure.ac: Source target-specific configuration fragment
for GCC. Pass through with_multi_buildlist to host and target.
gcc/ChangeLog
* Makefile.in: Add with_multi_buildlist for multilib
configuration control. Pass an additional argument to
genmultilib indicating whether --with-multi-buildlist is set
(true or false). Use with_multi_buildlist to filter
multilib directories in fixinc_list.
* configure: Regenerate.
* configure.ac: Restrict the installed fixedincludes multilibs.
* configure.tgt: New file.
* doc/install.texi: Add --with-multi-buildlist configure option
for multilib filtering.
* genmultilib: Document the new eleventh argument indicating
whether --with-multi-buildlist configure option is set (true or
false). Update argument parsing to include this flag before
enable_multilib. Modify reuse rule validation:
- Keep the original error for reuse of nonexistent multilibs
when --with-multi-buildlist is not used.
- Suppress the error only when the new configure option is
active, allowing reuse rules to reference multilibs that are
intentionally excluded from the build.
Signed-off-by: Robert Suchanek <robert.suchanek@imgtec.com>
Signed-off-by: Chao-ying Fu <cfu@mips.com>
Signed-off-by: Aleksandar Rakic <aleksandar.rakic@htecgroup.com>
Most of the standard prelude is implemented in a combination of code
lowered by the front-end (standard operators, contants, etc) and
functions provided by the libga68 run-time library, to which the
former libcalls. Until now, all the support routines in libga68 were
written in C. However, many of the transput facilities are better
implemented in Algol 68.
The Revised Report includes a reference implementation (code listing)
of many of the standard routines. This implementation, however, makes
use of an "extended" program notation in order to denote certain
notions to avoid repetitive code. Therefore this commit includes
sppp, a build-time pre-processor written in awk that is only intended
to be used internally by the libga68 run-time library. This
preprocessor allows us to write code like:
proc subwhole = (Number v, int width) string:
case v in
{iter L {short short} {short} {} {long} {long long}}
{iter S {LENG LENG} {LENG} {} {SHORTEN} {SHORTEN SHORTEN}}
({L} int x):
begin string s, {L} int n := x;
while dig_char ({S} (n MOD {L} 10)) +=: s;
n %:= {L} 10; n /= {L} 0
do ~ od;
(UPB s > width | width * errorchar | s)
end
{reti {,}}
esac;
Resulting in cases for short short int, short int, int, long int and
long long int being macro-expanded in the routine's conformance
clause.
This commit also adds the necessary infrastructure for writing Algol
68 code in the libga68 library, including the ability of having
modules exported by libga68. An implementation of some of the
transput routines is also provided in standard.a68: whole, fixed,
float, string_to_L_real, char_in_string, L_int_width, L_real_width and
L_exp_with.
The build system changes include the backport of the Automake Algol 68
support, which is in a released version of Automake but not in the
version used for GCC, to libga68/m4/autoconf.m4.
Signed-off-by: Jose E. Marchesi <jemarch@gnu.org>
ChangeLog
* Makefile.def (flags_to_pass): Rename GA68, GA68FLAGS,
GA68_FOR_TARGET, GA68FLAGS_FOR_TARGET to A68, A68FLAGS,
A68_FOR_TARGET and A68FLAGS_FOR_TARGET.
* Makefile.tpl: Use A68, A68FLAGS, A68_FOR_BUILD and
A68_FOR_TARGET rather than GA68, GA68FLAGS, GA68_FOR_BUILD and
GA68_FOR_TARGET.
* Makefile.in: Regenerate.
* configure.ac: Set A68_FOR_BUILD rather than GA68_FOR_BUILD, and
invoke ACX_PROG_A68 rather than ACX_PROG_GA68.
Subst A68_FOR_BUILD rather than GA68_FOR_BUILD.
Subst A68 and A68FLAGS rather than GA68 and GA68FLAGS.
Set A68_FOR_TARGET rather than GA68_FOR_TARGET.
* configure: Regenerate.
* config-ml.in: Handle A68FLAGS and define A68 in sub-configures.
config/ChangeLog
* acx.m4: Define ACX_PROG_A68 rather than ACX_PROG_GA68.
(ACX_PROG_A68): Set A68 rather than GA68.
gcc/algol68/ChangeLog
* a68-lang.cc (a68_init_options): Add an entry to A68_MODULE_FILES
to map module Transput to the basename ga68.
gcc/testsuite/ChangeLog
* algol68/execute/char-in-string-1.a68: New test.
libga68/ChangeLog
* m4/autoconf.m4: New file.
* configure.ac: Expand AC_PROG_A68.
* configure: Regenerate.
* Makefile.am: Add rules to build Algol 68 sources and to
build the transput module.
* Makefile.in: Regenerate.
* acinclude.m4: Include m4/autoconf.m4.
* sppp.awk: New file.
* transput.a68.in: Likewise.
When building multilib libraries, CC/CXX etc are set with an option
-B*/lib/, instead of -B<something>/lib/<multi-os-directory>.
This will make some trouble in some case, for example building
cross toolchain based on Debian's cross packages:
If we have libc6-dev-i386-amd64-cross packages installed on
a non-x86 machine. This package will have the files in
/usr/x86_4-linux-gnu/lib32. The fellow configure will fail
when build libgcc for i386, with complains the libc is not
i386 ones:
../configure --enable-multilib --enable-multilib \
--target=x86_64-linux-gnu
Let's insert a "-B*/lib/`CC ${flags} --print-multi-os-directory`"
before "-B*/lib/".
This patch is based on the patch used by Debian now.
ChangeLog
* config-ml.in: Insert an -B option with multi-os-dir into
compiler commands used to build libraries.
Library build options from --with-multilib-list used to be processed with
*self_spec, which missed the driver's initial canonicalization. This
caused limitations on CFLAGS override and the use of driver-only options
like -m[no]-lsx.
The problem is solved by promoting the injection rules of --with-multilib-list
options to the first element of DRIVER_SELF_SPECS, to make them execute before
the canonialization. The library-build options are also hard-coded in
the driver and can be used conveniently by the builders of other non-gcc
libraries via the use of -fmultiflags.
Bootstrapped and tested on loongarch64-linux-gnu.
ChangeLog:
* config-ml.in: Remove unneeded loongarch clause.
* configure.ac: Register custom makefile fragments mt-loongarch-*
for loongarch targets.
* configure: Regenerate.
config/ChangeLog:
* mt-loongarch-mlib: New file. Pass -fmultiflags when building
target libraries (FLAGS_FOR_TARGET).
* mt-loongarch-elf: New file.
* mt-loongarch-gnu: New file.
gcc/ChangeLog:
* config.gcc: Pass the default ABI via TM_MULTILIB_CONFIG.
* config/loongarch/loongarch-driver.h: Invoke MLIB_SELF_SPECS
before the driver canonicalization routines.
* config/loongarch/loongarch.h: Move definitions of CC1_SPEC etc.
to loongarch-driver.h
* config/loongarch/t-linux: Move multilib-related definitions to
t-multilib.
* config/loongarch/t-multilib: New file. Inject library build
options obtained from --with-multilib-list.
* config/loongarch/t-loongarch: Same.
The configure script and the GCC driver are updated so that
it is easier to customize and control GCC builds for targeting
different LoongArch implementations.
* Make --with-abi obsolete, since it might cause different default ABI
under the same target triplet, which is undesirable. The default ABI
is now purely decided by the target triplet.
* Support options for LoongArch SIMD extensions:
new configure options --with-simd={none,lsx,lasx};
new compiler option -msimd={none,lsx,lasx};
new driver options -m[no]-l[a]sx.
* Enforce the priority of configuration paths (for <parm>={fpu,tune,simd}):
-m<parm> > -march-implied > --with-<parm> > --with-arch-implied.
* Allow the user to control the compiler options used when building
GCC libraries for each multilib variant via --with-multilib-list
and --with-multilib-default. This could become more useful when
we have 32-bit support later.
Example 1: the following configure option
--with-multilib-list=lp64d/la464/mno-strict-align/msimd=lsx,lp64s/mfpu=32
| | | |
-mabi=ABI -march=ARCH a list of other options
(mandatory) (optional) (optional)
builds two sets of libraries:
1. lp64d/base ABI (built with "-march=la464 -mno-strict-align -msimd=lsx")
2. lp64s/base ABI (built with "-march=abi-default -mfpu=32")
Example 2: the following 3 configure options
--with-arch=loongarch64
--with-multilib-list=lp64d,lp64f,lp64s/la464
--with-multilib-default=fixed/mno-strict-align/mfpu=64
| | |
-march=ARCH a list of other options
(optional) (optional)
is equivalent to (in terms of building libraries):
--with-multilib-list=\
lp64d/loongarch64/mno-strict-align/mfpu=64,\
lp64f/loongarch64/mno-strict-align/mfpu=64,\
lp64s/la464
Note:
1. the GCC driver and compiler proper does not support
"-march=fixed". "fixed" that appear here acts as a placeholder for
"use whatever ARCH in --with-arch=ARCH" (or the default value
of --with-arch=ARCH if --with-arch is not explicitly configured).
2. if the ARCH part is omitted, "-march=abi-default"
is used for building all library variants, which
practically means enabling the minimal ISA features
that can support the given ABI.
ChangeLog:
* config-ml.in: Do not build the multilib library variant
that is duplicate with the toplevel one.
gcc/ChangeLog:
* config.gcc: Make --with-abi= obsolete, decide the default ABI
with target triplet. Allow specifying multilib library build
options with --with-multilib-list and --with-multilib-default.
* config/loongarch/t-linux: Likewise.
* config/loongarch/genopts/loongarch-strings: Likewise.
* config/loongarch/loongarch-str.h: Likewise.
* doc/install.texi: Likewise.
* config/loongarch/genopts/loongarch.opt.in: Introduce
-m[no-]l[a]sx options. Only process -m*-float and
-m[no-]l[a]sx in the GCC driver.
* config/loongarch/loongarch.opt: Likewise.
* config/loongarch/la464.md: Likewise.
* config/loongarch/loongarch-c.cc: Likewise.
* config/loongarch/loongarch-cpu.cc: Likewise.
* config/loongarch/loongarch-cpu.h: Likewise.
* config/loongarch/loongarch-def.c: Likewise.
* config/loongarch/loongarch-def.h: Likewise.
* config/loongarch/loongarch-driver.cc: Likewise.
* config/loongarch/loongarch-driver.h: Likewise.
* config/loongarch/loongarch-opts.cc: Likewise.
* config/loongarch/loongarch-opts.h: Likewise.
* config/loongarch/loongarch.cc: Likewise.
* doc/invoke.texi: Likewise.
The FIXME comments saying "Leave out until this is tested a bit more"
are from 1997. I think they've been sufficiently tested.
ChangeLog:
* config-ml.in (multi-do, multi-clean): Add @ to silence recipes.
Remove FIXME comments.
ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config-ml.in (msp430-*-*): Support --disable-no-exceptions configure
flag.
gcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
crtbegin_no_eh.o if building for the C language.
[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
except C.
(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for
the C language.
[fno-exceptions]: Use crtend_no_eh.o if building for any language
except C.
* config/msp430/t-msp430: Add -fno-exceptions multilib.
* doc/install.texi: Document --disable-no-exceptions multilib configure
option.
* doc/sourcebuild.texi: Document exceptions_enabled effective target.
gcc/testsuite/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* lib/gcc-dg.exp: Add dg-prune messages for when exception handling is
disabled.
* lib/target-supports.exp (check_effective_target_exceptions_enabled):
New.
libgcc/ChangeLog:
2019-12-11 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config.host: Add crt{begin,end}_no_eh.o to "extra_parts".
* config.host (msp430*-*-elf): Add crt{begin,end}_no_eh.o to
"extra_parts".
From-SVN: r279246
ChangeLog:
* Makefile.def (target_modules): Add libphobos.
(flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and
GDCFLAGS_FOR_TARGET.
(dependencies): Make libphobos depend on libatomic, libbacktrace
configure, and zlib configure.
(language): Add language d.
* Makefile.in: Rebuild.
* Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS.
(HOST_EXPORTS): Add GDC.
(POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD.
(BASE_TARGET_EXPORTS): Add GDC.
(GDC_FOR_BUILD, GDC, GDCFLAGS): New variables.
(GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables.
(EXTRA_HOST_FLAGS): Add GDC.
(STAGE1_FLAGS_TO_PASS): Add GDC.
(EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS.
* config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag
environment variables.
* configure: Rebuild.
* configure.ac: Add target-libphobos to target_libraries. Set and
substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
config/ChangeLog:
* multi.m4: Set GDC.
gcc/ChangeLog:
* Makefile.in (tm_d_file_list, tm_d_include_list): New variables.
(TM_D_H, D_TARGET_DEF, D_TARGET_H, D_TARGET_OBJS): New variables.
(tm_d.h, cs-tm_d.h, default-d.o): New rules.
(d/d-target-hooks-def.h, s-d-target-hooks-def-h): New rules.
(s-tm-texi): Also check timestamp on d-target.def.
(generated_files): Add TM_D_H and d-target-hooks-def.h.
(build/genhooks.o): Also depend on D_TARGET_DEF.
* config.gcc (tm_d_file, d_target_objs, target_has_targetdm): New
variables.
* config/aarch64/aarch64-d.c: New file.
* config/aarch64/aarch64-linux.h (GNU_USER_TARGET_D_CRITSEC_SIZE):
Define.
* config/aarch64/aarch64-protos.h (aarch64_d_target_versions): New
prototype.
* config/aarch64/aarch64.h (TARGET_D_CPU_VERSIONS): Define.
* config/aarch64/t-aarch64 (aarch64-d.o): New rule.
* config/arm/arm-d.c: New file.
* config/arm/arm-protos.h (arm_d_target_versions): New prototype.
* config/arm/arm.h (TARGET_D_CPU_VERSIONS): Define.
* config/arm/linux-eabi.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/arm/t-arm (arm-d.o): New rule.
* config/default-d.c: New file.
* config/glibc-d.c: New file.
* config/gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/i386/i386-d.c: New file.
* config/i386/i386-protos.h (ix86_d_target_versions): New prototype.
* config/i386/i386.h (TARGET_D_CPU_VERSIONS): Define.
* config/i386/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
(GNU_USER_TARGET_D_CRITSEC_SIZE): Define.
* config/i386/t-i386 (i386-d.o): New rule.
* config/kfreebsd-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/kopensolaris-gnu.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/linux-android.h (ANDROID_TARGET_D_OS_VERSIONS): Define.
* config/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/mips/linux-common.h (EXTRA_TARGET_D_OS_VERSIONS): Define.
* config/mips/mips-d.c: New file.
* config/mips/mips-protos.h (mips_d_target_versions): New prototype.
* config/mips/mips.h (TARGET_D_CPU_VERSIONS): Define.
* config/mips/t-mips (mips-d.o): New rule.
* config/powerpcspe/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/powerpcspe/powerpcspe-d.c: New file.
* config/powerpcspe/powerpcspe-protos.h (rs6000_d_target_versions):
New prototype.
* config/powerpcspe/powerpcspe.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/powerpcspe/powerpcspe.h (TARGET_D_CPU_VERSIONS): Define.
* config/powerpcspe/t-powerpcspe (powerpcspe-d.o): New rule.
* config/riscv/riscv-d.c: New file.
* config/riscv/riscv-protos.h (riscv_d_target_versions): New
prototype.
* config/riscv/riscv.h (TARGET_D_CPU_VERSIONS): Define.
* config/riscv/t-riscv (riscv-d.o): New rule.
* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/linux64.h (GNU_USER_TARGET_D_OS_VERSIONS): Define.
* config/rs6000/rs6000-d.c: New file.
* config/rs6000/rs6000-protos.h (rs6000_d_target_versions): New
prototype.
* config/rs6000/rs6000.c (rs6000_output_function_epilogue):
Support GNU D by using 0 as the language type.
* config/rs6000/rs6000.h (TARGET_D_CPU_VERSIONS): Define.
* config/rs6000/t-rs6000 (rs6000-d.o): New rule.
* config/s390/s390-d.c: New file.
* config/s390/s390-protos.h (s390_d_target_versions): New prototype.
* config/s390/s390.h (TARGET_D_CPU_VERSIONS): Define.
* config/s390/t-s390 (s390-d.o): New rule.
* config/sparc/sparc-d.c: New file.
* config/sparc/sparc-protos.h (sparc_d_target_versions): New
prototype.
* config/sparc/sparc.h (TARGET_D_CPU_VERSIONS): Define.
* config/sparc/t-sparc (sparc-d.o): New rule.
* config/t-glibc (glibc-d.o): New rule.
* configure: Regenerated.
* configure.ac (tm_d_file): New variable.
(tm_d_file_list, tm_d_include_list, d_target_objs): Add substitutes.
* doc/contrib.texi (Contributors): Add self for the D frontend.
* doc/frontends.texi (G++ and GCC): Mention D as a supported language.
* doc/install.texi (Configuration): Mention libphobos as an option for
--enable-shared. Mention d as an option for --enable-languages.
(Testing): Mention check-d as a target.
* doc/invoke.texi (Overall Options): Mention .d, .dd, and .di as file
name suffixes. Mention d as a -x option.
* doc/sourcebuild.texi (Top Level): Mention libphobos.
* doc/standards.texi (Standards): Add section on D language.
* doc/tm.texi: Regenerated.
* doc/tm.texi.in: Add @node for D language and ABI, and @hook for
TARGET_CPU_VERSIONS, TARGET_D_OS_VERSIONS, and TARGET_D_CRITSEC_SIZE.
* dwarf2out.c (is_dlang): New function.
(gen_compile_unit_die): Use DW_LANG_D for D.
(declare_in_namespace): Return module die for D, instead of adding
extra declarations into the namespace.
(gen_namespace_die): Generate DW_TAG_module for D.
(gen_decl_die): Handle CONST_DECLSs for D.
(dwarf2out_decl): Likewise.
(prune_unused_types_walk_local_classes): Handle DW_tag_interface_type.
(prune_unused_types_walk): Handle DW_tag_interface_type same as other
kinds of aggregates.
* gcc.c (default_compilers): Add entries for .d, .dd and .di.
* genhooks.c: Include d/d-target.def.
gcc/po/ChangeLog:
* EXCLUDES: Add sources from d/dmd.
gcc/testsuite/ChangeLog:
* gcc.misc-tests/help.exp: Add D to option descriptions check.
* gdc.dg/asan/asan.exp: New file.
* gdc.dg/asan/gdc272.d: New test.
* gdc.dg/compilable.d: New test.
* gdc.dg/dg.exp: New file.
* gdc.dg/gdc254.d: New test.
* gdc.dg/gdc260.d: New test.
* gdc.dg/gdc270a.d: New test.
* gdc.dg/gdc270b.d: New test.
* gdc.dg/gdc282.d: New test.
* gdc.dg/gdc283.d: New test.
* gdc.dg/imports/gdc170.d: New test.
* gdc.dg/imports/gdc231.d: New test.
* gdc.dg/imports/gdc239.d: New test.
* gdc.dg/imports/gdc241a.d: New test.
* gdc.dg/imports/gdc241b.d: New test.
* gdc.dg/imports/gdc251a.d: New test.
* gdc.dg/imports/gdc251b.d: New test.
* gdc.dg/imports/gdc253.d: New test.
* gdc.dg/imports/gdc254a.d: New test.
* gdc.dg/imports/gdc256.d: New test.
* gdc.dg/imports/gdc27.d: New test.
* gdc.dg/imports/gdcpkg256/package.d: New test.
* gdc.dg/imports/runnable.d: New test.
* gdc.dg/link.d: New test.
* gdc.dg/lto/lto.exp: New file.
* gdc.dg/lto/ltotests_0.d: New test.
* gdc.dg/lto/ltotests_1.d: New test.
* gdc.dg/runnable.d: New test.
* gdc.dg/simd.d: New test.
* gdc.test/gdc-test.exp: New file.
* lib/gdc-dg.exp: New file.
* lib/gdc.exp: New file.
libphobos/ChangeLog:
* Makefile.am: New file.
* Makefile.in: New file.
* acinclude.m4: New file.
* aclocal.m4: New file.
* config.h.in: New file.
* configure: New file.
* configure.ac: New file.
* d_rules.am: New file.
* libdruntime/Makefile.am: New file.
* libdruntime/Makefile.in: New file.
* libdruntime/__entrypoint.di: New file.
* libdruntime/__main.di: New file.
* libdruntime/gcc/attribute.d: New file.
* libdruntime/gcc/backtrace.d: New file.
* libdruntime/gcc/builtins.d: New file.
* libdruntime/gcc/config.d.in: New file.
* libdruntime/gcc/deh.d: New file.
* libdruntime/gcc/libbacktrace.d.in: New file.
* libdruntime/gcc/unwind/arm.d: New file.
* libdruntime/gcc/unwind/arm_common.d: New file.
* libdruntime/gcc/unwind/c6x.d: New file.
* libdruntime/gcc/unwind/generic.d: New file.
* libdruntime/gcc/unwind/package.d: New file.
* libdruntime/gcc/unwind/pe.d: New file.
* m4/autoconf.m4: New file.
* m4/druntime.m4: New file.
* m4/druntime/cpu.m4: New file.
* m4/druntime/libraries.m4: New file.
* m4/druntime/os.m4: New file.
* m4/gcc_support.m4: New file.
* m4/gdc.m4: New file.
* m4/libtool.m4: New file.
* src/Makefile.am: New file.
* src/Makefile.in: New file.
* src/libgphobos.spec.in: New file.
* testsuite/Makefile.am: New file.
* testsuite/Makefile.in: New file.
* testsuite/config/default.exp: New file.
* testsuite/lib/libphobos-dg.exp: New file.
* testsuite/lib/libphobos.exp: New file.
* testsuite/testsuite_flags.in: New file.
From-SVN: r265573
2007-11-28 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
* config-ml.in: Robustify against white space in absolute file
names.
* config-ml.in (multi-clean): Substitute ${Makefile}.
Remove superfluous ${Makefile} in list.
libgomp:
2007-11-29 Andris Pavenis <andris.pavenis@iki.fi>
Paolo Bonzini <bonzini@gnu.org>
* Makefile.am: Use space as vpath separator. Use 'vpath %'
instead of 'VPATH ='.
* Makefile.in: Regenerate.
gcc:
2007-11-29 Andris Pavenis <andris.pavenis@iki.fi>
* Makefile.in: Use separate vpath lines for each path.
libstdc++-v3:
2007-11-29 Andris Pavenis <andris.pavenis@iki.fi>
* src/Makefile.am: Use separate vpath lines for each path.
M libgomp/Makefile.in
M libgomp/ChangeLog
M libgomp/Makefile.am
M gcc/ChangeLog
M gcc/Makefile.in
M libstdc++-v3/src/Makefile.in
M libstdc++-v3/src/Makefile.am
M libstdc++-v3/ChangeLog
M ChangeLog
From-SVN: r130514
2003-07-29 Phil Edwards <pme@gcc.gnu.org>
* config-ml.in: Use ac_configure_args directly instead of
ml_arguments. Only set ml_norecursion if --no[-]recursion is
actually seen.
From-SVN: r69934
